User Manual

General Maintenance
Your Billi B-3000 has been designed to require
minimal maintenance other than replacement
of filter cartridges. During each filter change,
check all water connection fittings for signs
of leakage. Check all tubing for any signs of
damage. Check the cupboard area around
the base of unit for any signs of moisture.
Cleaning the dispenser
Your B-3000 Dispenser is fabricated from
robust metal with a tough protect chrome
plating. Care of dispenser is as with any
chrome plated tapware. Avoid using abrasive
cleaners. Wipe clean using a damp cloth.
Use of a non-solvent, non-smearing cleaner
such as Windex is recommended. Do not
pour water over dispenser.
Cupboard ventilation requirements
Your Billi B-3000 underbench module
is designed to not require any cupboard
ventilation or air space around the
unit; simplifying installation and space
requirements. However, care should be
taken when using the cupboard space,
to avoid stretching or damaging plastic
pipe work. Check fittings and tubing at each
filter change for signs of damage or leakage.
Always ensure access to power switch and
water supply tap is not restricted.
Features and Modes
Slimline Dispenser
To dispense filtered water, the dispenser
tap lever will need to be rotated. The lever
will automatically return to the o position.
The spout can be swivelled to suit your
installation.
Adjustable chilled water temperature
The chilled water delivery temperature
can be adjusted to suit your preference.
The blue control knob, located on the front
of the Chiller Module, can be adjusted if a
cooler or warmer temperature is required.
Billi Filter Cartridges
The B-3000 features the Billi dual stage
filtration system. It is fitted with single
dual stage filter incorporating sediment and
chemical removal elements. All B-3000 filters
are manufactured using bacteria and biofilm
resistant materials for improved water quality.
Premium filters provide a better tasting water
due to the high quality, carbon chemical
removal filter. Sub-micron rated, these
filters have excellent chemical absorption,
removing or reducing chlorine, volatile organic
compounds (VOCs), chemicals, tastes and
odours. All drinking water filtration systems
should be flushed after a period
of non-use.
There are 2 types of filter cartridge sets
oered.
994001 5.0 micron replacement filter
994002 0.2 micron replacement filter
Use only genuine Billi Filter Cartridges as
designed for this system.
If the system has not been used for a period
of 3 days or more, lift the dispenser lever and
flush the system for at least 1 minute.
3
User guide
Billi B-3000.