Specifications Sheet

B-3000 Specification Sheet
Specifications and guide to standard model selection
Product
Number
Description
Suggested no.
of persons
Chilled
cups / hour
Total current
draw amps
Unit
Height (mm)
Unit
Width (mm)
Unit
Depth (mm)
913000RCH
B-3000
Family use
60
10
340
180
360
Water Supply
A single 15mm (1/2”) stop-tap with a
male thread should be installed in an
easily accessible position. Water supply
must be microbiologically safe to drink,
with a minimum dynamic water pressure
of 250kPa to a maximum of 1200kPa.
Electrical installation requirements
A standard 10 amp power outlet is
required in the cupboard where the unit
is to be installed. It is supplied with a 1
metre flex cord and plug.
Warranty
The B-3000 range is covered by a
comprehensive 2 year warranty on all
parts and labour.
Technical Advice
Contact Billi Pty Ltd on 1800 812 321
Filtration
Billi have partnered with globally
recognised brand Pentair Everpure to
create the most technologically
advanced filtration for instant boiling and
chilled filtered water systems. It
removes sediment and chemicals, allows
the flow of minerals through without
scale build up and suppresses harmful
bacteria in the water. Due to the unique
Fibredyne™ technology, our filters have
a longer life, higher flow rate and lower
pressure drop, leaving you with healthy
fresh water. All Billi cartridges are
certified by global public safety agency
NSF International.
Filter changes are made simple by our
swing-change system and replacement
cartridges are available online at
www.billi.com.au. Optional sub micron
filters are available.
Options and accessories
Dispenser Styles: The B-3000 is supplied
with a standard Round Slimline
Dispenser. The Square Slimline is an
optional style.
Billi Font: Allows the dispenser to be
located away from sink areas.
Finished in polished Stainless Steel,
optional Brushed Chrome, Gloss Black or
Matte Black finish available.
Certifications
Every Billi drinking water appliance is
manufactured under a certified quality
control system. The Billi B-3000 model
have been tested and comply with all
required standards including: Watermark
Licence Number 21525; Tested to;
AS3498 and AS/NZS4020; Victorian
Electrical Safety Act 1998 Approval
Number CS100600V, AS/NZS ISO 9002;
AS1428 Accessibility Design
Requirements; Section J6 of the BCA;
Certificate Number QEC 11627; C-Tick
approved.
Preferred Installation Layout
Billi Pty Ltd
42 Lucknow Crescent, Thomastown
Victoria, 3074 Australia
Telephone + 613 9469 0400
Facsimile + 613 9469 0499
Website www.billi.com.au
Designed and manufactured in Australia
As Billi Pty Ltd has a policy of continual
improvement, all details are subject to change
without notice.
All goods sold are subject to our standard
terms and conditions. 1016