User guide Billi B-5000 Tap options XL, XT, XR
User guide Billi B-5000 – XL, XT, XR. Contents Warnings & Important information Warnings & Important information . . . . . . . . 2 General Maintenance . . . . . . . . . . . . . . . . . . . . 3 Features and Modes . . . . . . . . . . . . . . . . . . . . . 4 Tap Options & Operation XL Tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 XR & XT Tap . . . . . . . . . . . . . . . . . . . . . . .
User guide Billi B-5000 – XL, XT, XR. – Billi hose sets as supplied with the appliance are to be used. Old or other manufacturer’s hose sets should not be re-used. – If the appliance is located where the ambient air temperature could fall below 4°C when the heater is not in use, do not turn off the power supply to the appliance. This safeguard does not offer the same protection to the connecting pipework and fittings. – The ambient temperatures this unit should operate within are 5°C to 30°C.
User guide Billi B-5000 – XL, XT, XR. Features and Modes Dispenser Swivel The B-5000 dispenser incorporates a swivel function, allowing the dispenser to be swung out of the way if more sink space is required. A central position stop provides positive location during normal usage. Safety Timeout Your Billi B-5000 incorporates a water delivery Safety Timeout to prevent an uncontrolled flow of water. Water flow stops automatically after a set time interval.
User guide Billi B-5000 – XL. Options and Operation To operate, simply press the left lever to dispense boiling water and the right lever to dispense chilled. When lifted the levers will latch for continual delivery, until released with a light press. Operating modes can be selected by the user by entering Options Mode. Within the options mode, you can set the safety switch through the hot water lever and power save mode through the cold water lever. To enter the options mode: 1.
User guide Billi B-5000 – XT, XR. Options and Operation To operate, simple press the red (left) button to dispense boiling water, and blue (right) button to dispense chilled filtered water. When the red or blue lights are double tapped, the water will dispense continually until interrupted by another light press of either blue or red buttons. Operating modes can be selected by the user by entering option mode.
User guide Billi B-5000 – XL. Dispenser Icon Orange dot. Flashes when filter change due. On constant when overdue. Red lock illuminated. Safety button activated. To use, press the indent on the back of the tap momentarily & lift or press the boiling lever. Green leaf illuminated. Eco intelligence. Green moon & stars illuminated. In holiday mode. Red & blue icons will not be displayed in this mode. Green moon & stars flashing In standby mode. Red & blue icons will not be displayed in this mode. Red dot.
User guide Billi B-5000 – XT. Dispenser Icon Orange dot. Flashes when filter change due. On constant when overdue. Red lock illuminated. Safety button activated. To use, press the red lock icon on the top of the tap momentarily & press the red button (left). Green leaf illuminated. Eco intelligence. Green moon & stars illuminated. In holiday mode. Red & blue icons will not be displayed in this mode. Green moon & stars flashing In standby mode. Red & blue icons will not be displayed in this mode. Red ring.
User guide Billi B-5000 – XR. Dispenser Icon Orange dot. Flashes when filter change due. On constant when overdue. Red lock illuminated. Safety button activated. To use, press the red lock icon on the top of the tap momentarily & press the red button (left). Green leaf illuminated. Eco intelligence. Green moon & stars illuminated. In holiday mode. Red & blue icons will not be displayed in this mode. Green moon & stars flashing In standby mode. Red & blue icons will not be displayed in this mode. Red ring.
User guide Billi B-5000 – XL, XT, XR. Billi Filter Cartridges The Billi B-5000 features the Billi swingchange filtration system. The B-5000 is fitted with a single filter. The filters use Fibredyne™ technology which is fibrous and matted together, increasing the surface area of the carbon, meaning there is greater contact time and improved quality of filtration.
User guide Billi B-5000 – XL, XT, XR. Filter removal and replacement instructions Important note: Please ensure you remove the foam packing under the filter before installing. 1. Remove the front panel. 2. Place the unit in Holiday Mode by pressing the Pressure Relief button once. The lights on the dispenser will alternate and then go off 3. Hold filter and swing towards you slowly. The top of the filter is in a hinged cradle assembly. It should stop after approximately 30 degrees of travel. 4.
User guide Billi B-5000 – XL, XT, XR. Thank you for choosing to install a Billi B-5000 Drinking Water Appliance. Your B-5000 is manufactured to exacting standards using high quality materials and with proper maintenance and care, should function for many years. For information on our filtration and service contract please contact Billi Head Office on 1800 812 321 or email us at service@billi.com.au. For technical support please call 1800 812 321 and speak to one of Billi’s experienced technician’s.
Billi Australia Pty Ltd 42 Lucknow Crescent, Thomastown Victoria 3074 Australia Telephone +61 3 9469 0400 Facsimile +61 3 9469 0499 www.billi.com.au Designed and manufactured in Australia . As Billi Australia Pty Ltd has a policy of continual improvement, all details are subject to change without notice . All goods are sold subject to our published terms and conditions . Billi is a registered trademark .