User Manual

clear window
Billi B-6000
Instant Boiling and Chilled Filtered Water System
Back
Finish
StartSelect
Help
On/O
Daylight
Saving
295mm
185mm
Installation
specifications.
—Easy installation
The B-6000, B-5000 and B-4000
dispensers feature a unique top
mounting system, making it simple to
install. There is no need to reach up
behind sink bowls to secure clamps or
tubes - the ‘snap-fit’ base is secured
into the mounting hole, pipework is fed
through from the top and the dispenser
securely clips into place. The B-3000
and B-1000 installation is just as simple.
Colour coded flexible tubing and easy
connect fittings ensure a rapid and
trouble-free install.
—Water supply
A single 15mm (1/2’’) stop-tap with a
male thread should be installed in an
easily accessible position. The water
supply must be microbiologically safe to
drink, with a minimum dynamic water
pressure of 250kPa.
—Power supply
Billi Home B-6000, B-5000, B-4000 and
B-3000 systems require a standard 10
amp power outlet. It is supplied with
a 1 metre flex cord and plug. B-1000
systems do not require a power supply.
—Dispenser riser
70mm dispenser extension – supplied
standard with the Billi dual temp Font.
Optional finishes include brushed and
black.
—Extension kit
Available for installations where the
dispenser needs to be oset from the
underbench unit.
XL Levered tap dimensions
35mm 95mm
205mm
bench thickness
1mm-48mm
204mm
35mm 35mm
315mm 180mm
180mm
800mm
maximum
tube
length
150mm
minimum
clearance
340mm
135mm
135mm
boiling and chilled water
tubing deleted for clarity
power outlet
15mm stop-tap
(installed by plumber)
95mm 95mm
B-6000 Preferred installation layout
Tap hole size 35mm
B-5000 and B-4000 Preferred
installation layout
Tap hole size 35mm
B-3000 Preferred installation layout
Tap hole size 22mm
B-1000 Preferred installation layout
Tap hole size 22mm
204mm
water tubing
deleted for clarity
800mm
maximum
tube
length
150mm
minimum
clearance
340mm
power outlet
15mm stop-taps
(installed by plumber)
water tubing
deleted for clarity
800mm
maximum
tube
length
150mm
min
clearance
340mm
power outlet
15mm stop-taps
(installed by plumber)
235mm
112mm
170mm
320mm
140mm
15mm stop-taps
(installed by plumber)
water tubing
deleted for clarity
217mm
112mm
170mm
185mm
295mm
Billi font benchtop layout
15