- Billion Router User's Manual

The detail instruction in Emergency/Failure Recovery Button

1. Recovery procedures for non-working routers (e.g. after a failed firmware upgrade flash):

Hold the Emergency/Failure Recovery Button on the back of the modem in. Keep this

button held in and turn on the modem. Once the lights on the modem have stopped flashing,

release the Emergency/Failure Recovery Button. The modem's emergency-reflash web

interface will then be accessible via

http://192.168.1.254/ where you can upload a firmware

image to restore the modem to a functional state. Please note that the modem will only

respond via its web interface at this address, and will not respond to ping requests from

your PC or to telnet connections.

2. Recovery procedures for a lost web interface password:

After turning the router on press the Emergency/Failure Recovery Button on the back of the

modem, and hold the button in until all lights on the modem flash and it reboots with factory

default settings. The login will be reset to admin and the password will be reset to admin,

and the modem will be accessible via its default IP address at http://192.168.1.254/

Before powered on the router to enter the recovery process. please

configure the IP address of the PC as 192.168.1.1 and process step by

step.

1. Power the router off.

2. Hold the " Emergency/Failure Recovery Button”.

3. Power on the router. Then Router's IP will reset to Default (Say

192.168.1.254)

4. Download the firmware.