- Billion Router User's Manual

The BiPAC 7300VGP series provides an embedded PPPoE client function to establish a

connection. You get greater access speed without changing the operation concept, while

sharing the same ISP account and paying for one access account. No PPPoE client

software is required for the local computer. Automatic Reconnect and Disconnect Timeout

(Idle Timer) functions are also provided.

Quality of Service (QoS)

QoS gives you full control over which types of outgoing data traffic should be given priority

by the router, ensuring important data like gaming packets, customer information, or

management information move through the router ay lightning speed, even under heavy

load. The QoS features are configurable by source IP address, destination IP address,

protocol, and port. You can throttle the speed at which different types of outgoing data pass

through the router, to ensure P2P users don’t saturate upload bandwidth, or office browsing

doesn’t bring client web serving to a halt. In addition, or alternatively, you can simply

change the priority of different types of upload data and let the router sort out the actual

speeds.

Virtual Server:

You can specify which services are visible to outside users. The router detects an incoming

service request and forwards it to the specific local computer for handling. For example,

you can assign a PC in a LAN to act as a Web server inside and expose it to the outside

network. Outside users can browse inside the web server directly while it is protected by

NAT. A DMZ host setting is also provided for local computers exposed to the outside

Internet network.

Dynamic Host Configuration Protocol (DHCP) Client and Server

On a WAN site, the DHCP client obtains an IP address from the Internet Service Provider

(ISP) automatically. On a LAN site, the DHCP server allocates a range of client IP

addresses, including subnet masks and DNS IP addresses and distributes them to local

computers. This provides an easy way to manage the local IP network.

Rich Packet Filtering

This feature filters the packet based on IP addresses as well as Port numbers. Filtering

packets to and from the Internet provides a higher level of security control.

Web-based GUI