- Billion Router User's Manual

IP Address: Enter the IP address of a specific internal server to which requests from the
specified port is forwarded.
Add: Click to add a new virtual server rule. Click again and the next figure appears.
Edit: Check the Rule No. you wish to edit and then click “Edit”.
Delete: Check the Rule No. you wish to delete, then click “Delete”.
Item: Item number
Service select: Select the service you wish to configure
Protocol: Automatic when you choose Service select
Start Port & End Port: Enter the public port number & range you wish to configure.
IP Address: Enter the IP address of a specific internal server to which requests from the
specified port is forwarded.
Since NAT acts as a “natural” Internet firewall, your router protects your network from
access by outside users, as all incoming connection attempts point to your router unless
you specifically create Virtual Server entries to forward those ports to a PC on your network.
When your router needs to allow outside users to access internal servers, e.g. a web server,
FTP server, Email server or game server, the router can act as a “virtual server”. You can
set up a local server with a specific port number for the service to use, e.g. web/HTTP (port
80), FTP (port 21), Telnet (port 23), SMTP (port 25), or POP3 (port 110). When an incoming
access request to the router for a specified port is received, it is forwarded to the
corresponding internal server.
For example, if you set the port number 80 (Web/HTTP) to be mapped to the IP Address
83