- Billion ADSL Modem/Router With Single Ethernet Port User's Manual

The following table describes the labels in this screen.

LABEL DESCRIPTION

IP Address A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not

fixed; the ISP assigns you a different one each time you connect to the Internet. The

Single User Account feature can be used with either a dynamic or static IP address.

Select Obtain an IP Address Automatically if you have a dynamic IP address;

otherwise select Static IP Address and type your ISP assigned IP address in the IP

Address text box below.

Subnet Mask Enter a subnet mask in dotted decimal notation.

Refer to the IP Subnetting appendix to calculate a subnet mask If you are

implementing subnetting.

ENET ENCAP

Gateway

You must specify a gateway IP address (supplied by your ISP) when you use ENET

ENCAP in the Encapsulation field in the previous screen.

Network Address

Translation

Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the

NAT chapter for more details.

Back

Click Back to go back to the first wizard screen.

Click Next to continue to the next wizard screen.

3.10.4 PPPoA

Select PPPoA from the Encapsulation drop-down list box in the first wizard screen to display

the screen as shown.