- Billion ADSL Modem/Router With Single Ethernet Port User's Manual

28
LAN Subnet Mask Enter a subnet mask in dotted decimal notation.
Client IP Pool
Starting Address
This field specifies the first of the contiguous addresses in the IP address pool.
Size of Client IP
Pool
This field specifies the size or count of the IP address pool.
Primary DNS
Server
Enter the IP addresses of the DNS servers. The DNS servers are passed to the
DHCP clients along with the IP address and the subnet mask.
Secondary DNS
Server
As above.
Remote DHCP
Server
If Relay is selected in the DHCP field above then enter the IP address of the actual
remote DHCP server here.
TCP/IP
IP Address Enter the IP address of your BIPAC 5100S in dotted decimal notation, for example,
192.168.1.254 (factory default).
IP Subnet Mask Type the subnet mask assigned to you by your ISP (if given).
RIP Direction
Select the RIP direction from None, Both, In Only and Out Only.
RIP Version
Select the RIP version from RIP-1, RIP-2B and RIP-2M.
Multicast IGMP (Internet Group Multicast Protocol) is a session-layer protocol used to establish
membership in a multicast group. The BIPAC 5100S supports both IGMP version 1
(IGMP-v1) and IGMP-v2. Select None to disable it.
Apply Click this button to save these settings back to the BIPAC 5100S.
Cancel Click this button to reset the fields in this screen.