- Billion ADSL Modem/Router With Single Ethernet Port User's Manual

41
The following table describes the labels in this screen.
LABEL DESCRIPTION
Start Port No. Enter a port number in this field.
To forward only one port, enter the port number again in the End Port No. field.
To forward a series of ports, enter the start port number here and the end port number
in the End Port No. field.
End Port No. Enter a port number in this field.
To forward only one port, enter the port number again in the Start Port No. field
above and then enter it again in this field.
To forward a series of ports, enter the last port number in a series that begins with the
port number in the Start Port No. field above.
IP Address Enter your server IP address in this field.
Save
Click Save to save your changes back to the BIPAC 5100S.
Cancel
Click Cancel to return to the previous configuration.
6.6 Configuring Address Mapping
Ordering your rules is important because the BIPAC 5100S applies the rules in the order that