- Billion ADSL Modem/Router With Single Ethernet Port User's Manual

7
Ethernet interface with the BIPAC 5100S itself as the gateway for each LAN network.
 IP Policy Routing (IPPR)
Traditionally, routing is based on the destination address only and the router takes the shortest
path to forward a packet. IP Policy Routing (IPPR) provides a mechanism to override the
default routing behavior and alter the packet forwarding based on the policy defined by the
network administrator.
 Protocol Support
♦ PPP (Point-to-Point Protocol) link layer protocol.
- PPP over PAP (RFC 1334).
- PPP over CHAP (RFC 1994).
♦ RIP I/RIP II
♦ IGMP Proxy
♦ ICMP support
♦ MIB II support (RFC 1213)
♦ PPPoE feature
- PPPoE idle time out
- PPPoE dial on demand
 Networking Compatibility
The BIPAC 5100S is compatible with major ADSL DSLAM (Digital Subscriber Line Access
Multiplexer) providers.
 Multiplexing
The BIPAC 5100S supports VC-based and LLC-based multiplexing.
 Encapsulation
The BIPAC 5100S series supports PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5),
RFC 1483 encapsulation over ATM, MAC encapsulated routing (ENET Encapsulation) as well
as PPP over Ethernet (RFC 2516).
 Network Management
♦ Embedded Web Configurator
♦ CLI (Command Line Interpreter)
♦ SNMP manageable
♦ DHCP Server/Client
♦ Built-in Diagnostic Tools
♦ Syslog
♦ TFTP/FTP server, firmware upgrade and configuration backup/support supported
 Diagnostics Capabilities
♦ The BIPAC 5100S can perform self-diagnostic tests. These tests check the integrity
of the following circuitry:
- FLASH memory