- Billion ADSL2+ Wireless Router User's Manual

111
Disable: Check to disable the router’s UPnP functionality.
Enable: Check to enable the router’s UPnP functionality.
UPnP Port: The Default setting is 2800. It is highly recommended you use this port
value. If this value conflicts with other ports already in use you may wish to change the port.
Installing UPnP in Windows Example
Follow the steps below to install the UPnP in Windows Me.
Step 1: Click Start and Control Panel. Double-click Add/Remove Programs.
Step 2: Click on the Windows Setup tab and select Communication in the Components
selection box. Click Details.
Step 3: In the Communications window, select the Universal Plug and Play check box in
the Components selection box.