- Billion ADSL2+ Wireless Router User's Manual

116
Web Configurator Easy Access
With UPnP, you can access web-based configuration for the BiPAC 7300GX without first
finding out the IP address of the router. This helps if you do not know the router’s IP
address.
Follow the steps below to access web configuration.
Step 1: Click Start and then Control Panel.
Step 2: Double-click Network Connections.
Step 3: Select My Network Places under Other Places.
Step 4: An icon describing each UPnP-enabled device shows under Local Network.
Step 5: Right-click on the icon of your BiPAC 7300GX and select Invoke. The web
configuration login screen displays.
Step 6: Right-click on the icon of your BiPAC 7300GX and select Properties. A properties
window displays basic information about the BiPAC 7300GX.
5.3.8.4 IGMP
IGMP, known as Internet Group Management Protocol, is used to management hosts from
multicast group.