- Billion ADSL2+ Wireless Router User's Manual

5.1.1 ADSL Status

DSP Firmware Version: DSP code version

DMT Status: Current DMT Status

Operational Mode: To show the state when user select “AUTO” on connect mode.

Upstream: Upstream rate.

Downstream: Downstream rate.

Noise Margin (Upstream): This is noise margin in upstream.

Noise Margin (Downstream): This is noise margin in downstream.

Attenuation (Upstream): This is attenuation of signal in upstream.

Attenuation (Downstream): This is attenuation of signal in downstream.

ADSL Mode: There are four modes “Open Annex Type and Follow DSLAM’s

Setting”, ”Annex A”, ”Annex L”, ”Annex M” and “Annex J” that user can select for this

connection.

Modulator: There are seven modes “AUTO”,”ADSL

multimode”,”ADSL2”, ”ADSL2+”,”G.Lite”, “T1.413” and “G.DMT” that user can select for

this connection.