- Billion ADSL2+ Wireless Router User's Manual

52
The router supports more than one Ethernet IP addresses in the LAN, and with distinct LAN
subnets through which you can access the Internet at the same time. Users usually only
have one subnet in their LAN. The default IP address for the router is 192.168.1.254.
IP Address: The default IP on this router.
Netmask: The default subnet mask on this router.
RIP: RIP v1, RIP v2, RIP v1+v2 and RIP v2 Multicast.
5.3.1.2 IP Alias
This function allows the creation of multiple virtual IP interfaces on this router. It helps to
connect two or more local networks to the ISP or remote node. In this case, an internal
router is not required.
IP Address: Specify an IP address on this virtual interface.
Netmask: Specify a subnet mask on this virtual interface.