- Billion USB ISDN TA Quick Start Guide

Billion BIPAC-221

Installing the BIPAC-221

POWER

USB

ISDN S.

1. Connect the external power adapter to the power jack. All

the LEDs light and then go off one by one, except that the

PWR LED will still light.

2. Connect your ISDN line to the ISDN S

RJ-45 jack.

3. Connect your analog telephone and/or G3 fax machine to

the phone ports.

4. Connect a headset to the “MIC/SPK” jacks.

5. Connect the USB cable to the USB port and connect the

other end to the PC.

For Windows 98:

1. Start Windows. After the opening banner, Windows will

tell you that the new device has been detected. You will

then see the following screen. Click “

Next >

”.

Power jack USB port Phone ports

ISDN S

RJ-45 jack