User's Manual

101
Duration: Set how many minutes to allow management access from remote side. Zero means
always on.
Allowed Access IP Address Range
Valid: Select Valid to allow remote management from these IP ranges.
IP Address Range: Specify what IP address to be allowed to access device from remote side. Clink
Add to insert management IP address list.
Save Configuration to Flash
After changing the router’s configuration settings, you must save all of the configuration parameters
to FLASH to avoid losing them after turning off or resetting your router. Click “Save Config” and click
“Apply” to write your new configuration to FLASH.
Restart
Click Restart with option Current Settings to reboot your router (and restore your last saved
configuration).
If you wish to restart the router using the factory default settings (for example, after a firmware
upgrade or if you have saved an incorrect configuration), select Factory Default Settings to reset to
factory default settings.
Logout
To exit the router’s web interface, choose Logout. Please ensure that you have saved the
configuration settings before you logout.