User's Manual

Quick Start

Set Wireless configuration

WLAN Service:

Default setting is set to Enable.

ESSID: The ESSID is the unique name of a wireless access point (AP) to be distinguished from

another. For security purpose, change to a unique ID name to the AP which is already built-in to the

router’s wireless interface. It is case sensitive and must not excess 32 characters. Make sure your

wireless clients have exactly the ESSID as the device, in order to get connected to your network.

Channel ID: Select the ID channel that you would like to use.

Security Mode: You can disable or enable with WPA or WEP for protecting wireless network. The

default mode of wireless security is Disable.

Regulation Domain: There are seven Regulation Domains for you to choose from, including North

America (N.America), Europe, France, etc. The Channel ID will be different based on this setting.

For detailed Quick Start configration, turn to Quick_Start

for help.