User's Manual

31
Status: The current status of the 3G /4G-LTE SIM card. Click this link to configure 3G (4G-LTE). For
detail, turn to 3G
configuration page for help.
Signal Strength: The signal strength bar indicates the current 3G(4G-LTE) signal strength.
Network Name: The network name that the device is connected to.
Card Name: The name of the 3G /4G-LTE SIM card.
Card Firmware: The current firmware of the 3G / 4G-LTE card.
Card IMEI: The unique identification number that is used to identify the 3G / 4G-LTE card.
Current TX Bytes / Packets: The statistics of data transmission in bytes / packets during a call.
Current RX Bytes / Packets: The statistics of data received in bytes / packets during a call.
Total TX Bytes / Packets: The statistics of total data transmission in bytes / packets since
system ready.
Total RX Bytes / Packets: The statistics of total data received in bytes / packets since system
ready.
Amount used: Show the traffic or hours has been used.
Billing preiod: The day from which the fee is charged.
ARP Table
This section displays the router’s ARP (Address Resolution Protocol) Table, which shows the
mapping of Internet (IP) addresses to Ethernet (MAC) addresses. This is useful as a quick way of
determining the MAC address of the network interface of your PCs to use with the router’s Firewall
- MAC Address Filter function. See the Firewall section of this manual for more information on this
feature.