User's Manual

Log: Choose “log” if you wish to generate logs when the filer rule is applied to a packet.

Add: Click this button to add a new packet filter rule and the added rule will appear at the bottom

table.

Edit: Check the Rule No. you wish to edit, and then click “Edit”.

Delete: Check the Rule No. you wish to delete, and then click “Delete”.

MAC Filter

A MAC (Media Access Control) address is the unique network hardware identifier for each PC on

your network’s interface (i.e. its Network Interface Card or Ethernet card). Using your router’s MAC

Address Filter function, you can configure to block specific machines from accessing your LAN.

There are no pre-defined MAC address filter rules; you can add the filter rules to meet your

requirements.

Action˖

˖˖

˖select to determine how to do with the filter.

If the DHCP server option is enabled, you must be very careful in assigning

IP addresses of a filtered private IP range to avoid conflicts because you do

not know which PC in the LAN is assigned which IP address. The easiest

and safest way is that the filtered IP address is assigned to a specific PC

that is not allowed to access an outside resource such as the Internet. You

configure the filtered IP address manually for this PC, but it stays in the

same subnet with the router.

Attention