User's Manual

Table Of Contents

4.4.4.6 Packet Filter

ou can filter the packages by MAC address, IP address, Protocol, Port number and Application or URL.

 IP & MAC Filter

Packet Filter

Filter Type: There are three types “IP & MAC Filter”, “Application Filter”, and “URL Filter” that user can select

for this filter rule. Here we set IP & MAC Filter.

IP & MAC Filter Editing

Rule Index: This is item number

Individual Active: Select Yes to activate the rule.

Action: This is how to deal with the packets matching the rule. Allow please select White List or block selecting

Black List.

Interface: Select to determine which interface the rule will be applied to.

Direction: Select to determine whether the rule applies to outgoing packets, incoming packets or packets of

both directions.

Type: Choose type of field you want to specify to monitor. Select “IPv4” for IPv4 address, port number and

protocol. Select “IPv6” for IPv6 address, port number and protocol. Select “MAC” for MAC address.

Source IP Address: The source IP address of packets to be monitored. 0.0.0.0 means “Don’t care”.

Source Subnet Mask: Enter the subnet mask of the source network.