User's Manual

Advanced Configuration /
Status
34
BEC 6800RUL User Manual
Mobile Status
This section displays the 3G / 4G Card overall status with information such as the current signal
strength, statistics of current data transmission and total data transmission.
Status: The current status of the 3G/4G-LTE connection.
Signal Strength: The signal strength bar indicates the current 3G(4G) signal strength.
SIM Card Status: It indicates if the SIM Card is being inserted correctly or not. If SIM card is not
installed properly or cannot be detected, ”SIM Card Not Found” will be displayed.
Network ID / Name: The network ID and/or name that the SIM card is connected to.
Cell ID: The information of Cell ID.
Card IMEI: The unique identification number that is used to identify the 3G / 4G card.
Card IMSI: The international mobile subscriber identity used to uniquely idenfy the 3G / 4G card
Network Mode: Show the using network mode.
Network Band: Show the using network band.
Current TX Bytes / Packets: The statistics of data transmission in bytes / packets during a
call.
Current RX Bytes / Packets: The statistics of data received in bytes / packets during a call.
Total TX Bytes / Packets: The statistics of total data transmission in bytes / packets since
system ready.
Total RX Bytes / Packets: The statistics of total data received in bytes / packets since system
ready.
Amount used: Show the traffic or hours has been used.