User's Manual

Advanced Configuration /
LAN
40
BEC 6800RUL User Manual
Configuration
Click this item to access the following sub-items that configure the 3G / 4G router: LAN, WAN,
System, Firewall, QoS, Virtual Server, Time Schedule, and Advanced.
These functions are described in the following sections.
LAN - Local Area Network
A Local Area Network (LAN) is a shared communication system to which many computers are
attached and is limited to the immediate area, usually the same building or floor of a building.
Ethernet
The router supports more than one Ethernet IP addresses in the LAN, and with distinct LAN
subnets through which you can access the Internet at the same time. Users usually only have one
subnet in their LAN. The default IP address for the router is 192.168.1.254.
IP Address: The IP on this router, default is 192.168.1.254.
Netmask: The subnet mask on this router.
RIP: RIP v1, RIP v2 Broadcast, RIP v1+v2 Broadcast and RIP v2 Multicast.
IP Alias
This function allows the creation of multiple virtual IP interfaces on this router. It helps to connect
two or more local networks to the ISP or remote node. In this case, an internal router is not
required.
IP Address: Specify an IP address on this virtual interface.
Netmask: Specify a subnet mask on this virtual interface.