User's Manual

Advanced Configuration /
Firewall
57
BEC 6800RUL User Manual
MAC Filter
A MAC (Media Access Control) address is the unique network hardware identifier for each PC on
your network’s interface (i.e. its Network Interface Card or Ethernet card). Using your router’s MAC
Address Filter function, you can configure to block specific machines from accessing your LAN.
There are no pre-defined MAC address filter rules; you can add the filter rules to meet your
requirements.
Action
：select to determine how to do with the filter.
 Disable: to disable the MAC filter function.
 Allow: to enable the MAC filter function and allow the host of the following set MAC
addresses to access.
 Block: to enable the MAC filter function and block the host of the following set MAC
addresses to access.
MAC Address: Enter the MAC addresses you wish to manage.
Time Schedule: It is self-defined time period. You may specify a time schedule for your
prioritization policy. For setup and detail, refer to Time Schedule section.