User's Manual

Troubleshooting

BEC 6800RUL User Manual

Recovery Procedures

Problem

Suggested Action

- The front LEDs display incorrectly

- Still cannot access to the router

management interface after pressing the

RESET button.

- Software / Firmware upgrade failure

1. Power on the router, once the Power LED lit red,

please press this reset button using the end of paper

clip or other small pointed object immediately.

2. The router’s emergency-reflash web interface will

then be accessible via http://192.168.1.1 where you

can upload a firmware image to restore the router to

a functional state, Please note that the router will

only respond with its web interface at this address

(192.168.1.1), and will not respond to ping request

from your PC or other telnet operations.