User's Manual
146
Edit One-to-One NAT (Network Address Translation)
2QHWR2QH1$7PDSVDVSHFL¿FSULYDWHORFDO,3DGGUHVVWRDJOREDOSXEOLF,3DGGUHVV
,I\RXKDYHPXOWLSOHSXEOLF:$1,3DGGUHVVHVIURP\RX,63\RXDUHHOLJLEOHIRU2QHWR2QH1$7
to utilize these IP addresses.
*RWR&RQ¿JXUDWLRQ > Virtual Server > Edit One-to-one NAT
NAT Type: Select desired NAT type. As set in default setting, it disables the One-to-One NAT
function.
Global IP Address:
Subnet: 7KHVXEQHWRIWKHSXEOLF:$1,3DGGUHVVJLYHQE\\RXU,63,I\RXU,63KDVSUR-
vided this information, you may insert it here. Otherwise, use IP Range method.
IP Range: 7KH ,3 DGGUHVV UDQJH RI \RXU SXEOLF:$1 ,3 DGGUHVVHV )RU H[DPSOH ,3
192.168.1.1, end IP: 192.168.1.10
Select the Apply button to apply your changes.
Check
to create a new One-to-One NAT rule: