User's Manual

149
Frequent loss of DSL
linesync
(disconnections).
Ensure that all other devices connected to the same telephone line
as your router (e.g. telephones, fax machines, analogue modems)
have a line filter connected between them and the wall socket
(unless you are using a Central Splitter or Central Filter installed by
a qualified and licensed electrician), and ensure that all line filters
are correctly installed and the right way around. Missing line filters
or line filters installed the wrong way around can cause problems
with your DSL connection, including causing frequent
disconnections.
Recovery procedures for non-working routers
Problem Corrective Action
Recovery procedures
for non-working
routers(e.g. after a
failed firmware
upgrade flash)
Power on the router, once the Power LED lit red, please
press this reset button using the end of paper clip or other
small pointed object immediately.
The router’s emergency-reflash web interface will then be
accessible via http://192.168.1.1 where you can upload a
firmware image to restore the router to a functional state,
Please note that the router will only respond with its web interface
at this address (192.168.1.1), and will not respond to ping request
from your PC or other telnet operations.