User's Manual

Click Add to create a queue.

Name: Type the name of the queue.

Enable: Select whether to enable the queue.

Interface: Select which interface this queue applies to.

Select interface, the following corresponding parameters will appear to let you configure, Enter the

information, Click Apply to conform. Then the item will be listed in the table.

Precedence: the precedence of the queue, interface P1-P4, 4 levels from high to low are 1-4. ATM

or PTM interfaces, 7 levels from high to low are 1-7, for the precedence of the default queue with the

interface of SP Scheduler Algorithm is 8. Here if the interface is of WFQ Scheduler Algorithm, you

should enter the weight of the queue.