User's Manual

3) Specify the classification results. Here you must Assign Classification Queue. Whether the

following parameters are needed is according to your needs. If you do not want to change the

original information, please leave it empty. The queues listed here in the Assign Classification

Queue are WAN interface queues set in Queue Config section. Select the needed queue. If you find

none queues here, turn back to check whether you have configured a queue and enable it.

3. Click Apply to save your settings. The added rule will listed as below.

Enable: check the enable check-box, then press Enable to activate the rule. If you want to disable

this rule, you can uncheck the corresponding check-box and press Enable button, the rule will be

disabled.

Remove: To delete the QoS class from the table, check Remove checkbox then click Remove

button to delete the selected item.