User's Manual

to. Only when RAW is selected, then you can type the protocol number (0-254) to identify the

protocol that you want the filter applies to. When Any is selected, it means the filter will applies to

any protocol.

Internal Port: This Port or Port Range defines the ports allowed to be used by the Remote/WAN to

connect to the application. Default is set from range 1 ~ 65535. It is recommended that this option be

configured by an advanced user.

External Port: This is the Port or Port Range that defines the application. Default is set from range 1

~ 65535.

Action: If a packet matches this filter rule, forward (allows the packets to pass) or drop (disallow

the packets to pass) this packet.

Direction: Determine whether the rule is for outgoing packets or for incoming packets.

Set up

Select the application you want to filter, input the information or leave it as default according to

yourself.

Press Apply to confirm and the item will be listed in the following table.