User's Manual

122
Group Name: type a group name.
WAN interface used in the grouping: select from the drop-down box the WAN interface you want
to applied in the group.
Grouped LAN Interfaces: select the LAN interfaces you want to group as a single group from
Available LAN Interfaces.
Automatically Add Clients With following DHCP Vendor IDs: enter the DHCP Vendor IDs for
which you want the Clients automatically added into the group. DHCP vendor ID (DHCP 60) is an
Authentication for DHCP Messages.
Click Apply to confirm your settings and your added group will be listed in the Interface Grouping
table below.
If you want to remove the group, check the box as the following and press Remove.
Note:
If you like to automatically add LAN clients to a WAN Interface in the new group add the
DHCP vendor ID string.
By configuring a DHCP vendor ID string any DHCP client request with the specified vendor
ID (DHCP option 60) will be denied an IP address from the local DHCP server.
If a vendor ID is configured for a specific client device, please REBOOT the client device
attached to the modem to allow it to obtain an appropriate IP address.
Each LAN interface can only be added into one group and one WAN interface can only be
used in one group.