User's Manual

130
physical Access Point (AP). When a single physical AP supports multiple “Virtual APs”, each Virtual
AP appears to stations (STAs) to be an independent physical AP, even though only a single physical
AP is present. For example, multiple Virtual APs might exist within a single physical AP, each
advertising a distinct SSID and capability set. Alternatively, multiple Virtual APs might advertise the
same SSID but a different capability set – allowing access to be provided via Web Portal, WEP, and
WPA simultaneously. Where APs are shared by multiple providers, Virtual APs provide each provider
with separate authentication and accounting data for their users, as well as diagnostic information,
without sharing sensitive management traffic or data between providers. You can enable the virtual
AP.
Here you can enable some Virtual APs according to the request. And the other parameters of virtual
APs are the same to the above.
Click Apply to apply your settings.