User's Manual

132
L Shared
It is similar to network authentication ‘Open’. But here the WEP Encryption must be enabled.
L 802.1x
RADIUS Server IP Address: RADIUS( Remote Authentication Dial In User Service), Enter
the IP address of RADIUS authentication server.
RADIUS Server Port: Enter the port number of RADIUS authentication server here.
RADIUS Key: Enter the password of RADIUS authentication server.
WEP Encryption: select to enable or disable WEP Encryption. Here select Enable.
Current Network Key: select the one to be the current network key. Please refer to key 2- 3
below.
Network Key (1- 4): Enter 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption
keys.Enter 5 ASCII characters or 10 hexadecimal digits for 64-bit encryption keys.