User's Manual

SNMP Access Control
Software on a PC within the LAN is required in order to utilize this function – Simple Network
Management Protocol.
Parameters
SNMP: Select Enable / Disable to activate / inactivate this function.
SNMP V1 and V2
Read Community: Specify a name to be identied as the Read Community, and an IP address.
This community string will be checked against the string entered in the conguration le. Once the
string name is matched, user obtains this IP address will be able to view the data.
Write Community: Specify a name to be identied as the Write Community, and an IP address.
This community string will be checked against the string entered in the conguration le. Once the
string name is matched, users from this IP address will be able to view and modify the data.
SNMP V3
Specify a name and password for authentication. And dene the access right from identied IP
address. Once the authentication has succeeded, users from this IP address will be able to view
and modify the data.
Click Apply to conrm the settings.
122