User's Manual

10
Device Description
The Front LEDs
LED Status Meaning
Red
Boot failure or in emergency mode
Power
Green
System ready
Green
Connected to an Gigabit Ethernet device or to a broadband
connection device.
Orange
Connect to an 10/100Mbps Ethernet device
Gigabit Ethernet Port
5/EWAN
Blinking
Data being transmitted / received
Green Successfully connected to a 1000Mbos LAN device
Orange Successfully connected to a 10/100Mbos LAN device
Gigabit Ethernet Port
1-4
Blinking Data being transmitted / received
USB
Green USB connection established
Green Wireless connection established
Wireless
Blinking Data being transmitted / received
Green
Wireless device(s) being connected successfully via WPS
mode
Blinking WPS configuration being in progress
WPS
Off WPS is off
Green Successfully connected to an xDSL DSLAM (Line Synced)
Green Blinking DSL synchronizing or waiting for DSL synchronizing
DSL 1 /2
Off DSL cable unplugged
Green IP connected and traffic is passing through the device
Blinking Data being transmitted / received
Red BiPAC 8920AX(L) fails to obtain and IP.
Internet
Off
BiPAC 8920AX(L) is either in bridged mode or WAN/DSL
connection is not ready