User's Manual

Factory Default Settings

Before configuring your router, you need to know the following default settings.

Web Interface (Username and Password)

Three user levels are provided by this router, namely Administrator, Remote and Local

respectively. See Access Control .

Administrator

Username: admin

Password: admin

Local

Username: user

Password: user

Remote

Username: support

Password: support

Attention

If you have forgotten the username and/or password of the router, you can restore the device

to its default setting by pressing the Reset Button more than 5 seconds.

Device LAN IPv4 settings

IPv4 Address: 192.168.1.254

Subnet Mask: 255.255.255.0

Device LAN IPv6 settings

IPv6 Address / prefix: Default is a link-local address and is different from each other as MAC

address is different from one to one. For example: fe80:0000:0000:0000:0204:edff:fe01:0001 / 64,

the prefix initiates by fe80::

DHCP server for IPv4

DHCP server is enabled.

Start IP Address: 192.168.1.254

IP pool counts: 100