User manual

whether you want to hide SSID.

Clients Isolation: if you enabled this function, then each of your wireless clients will not be able to

communicate with each other.

Disable WMM Advertise: Stop the router from ‘advertising’ its Wireless Multimedia (WMM)

functionality, which provides basic quality of service for time-sensitive applications (e.g. VoIP, Video).

Check to disable or enable this function.

Wireless multicast Forwarding (WMF): check to enable or disable wireless multicast forwarding.

SSID: The SSID is the unique name of a wireless access point (AP) to be distinguished from another.

For security purpose, change the default wlan-ap-2.4g to a unique ID name to the AP already built-in

to the router’s wireless interface. It is case sensitive and must not excess 32 characters. Make sure

your wireless clients have exactly the SSID as the device, in order to get connected to your network.

Note: SSID is case sensitive and must not exceed 32 characters.

BSSID: Basic Set Service Identifier, it is a local managed IEEE MAC address, and is 48 bits value.

Country: Different countries have different wireless band resources, so you can select the

appropriate Country according to your location.

Max Clients: enter the number of max clients the wireless network can supports,1-16.

Guest/virtual Access Points:

A “Virtual Access Point” is a logical entity that exists within a physical

Access Point (AP). When a single physical AP supports multiple “Virtual APs”, each Virtual AP

appears to stations (STAs) to be an independent physical AP, even though only a single physical AP

is present. For example, multiple Virtual APs might exist within a single physical AP, each advertising

a distinct SSID and capability set. Alternatively, multiple Virtual APs might advertise the same SSID

but a different capability set – allowing access to be provided via Web Portal, WEP, and WPA

simultaneously. Where APs are shared by multiple providers, Virtual APs provide each provider with

separate authentication and accounting data for their users, as well as diagnostic information,

without sharing sensitive management traffic or data between providers. You can enable the virtual

AP.

Here you can enable some Virtual APs according to the request. And the other parameters of virtual

APs are the same to the above.

Click Apply to apply your settings.