BiPAC 2073 R2 HomePlug AV 200 Ethernet Adapter BiPAC 2074 R2 HomePlug AV 200 Ethernet Bridge with AC Pass-Through Quick Start Guide
Quick Start Guide
Billion BiPAC 2073 R2/2074 R2 HomePlug AV 200 Ethernet Adapter Series FCC Certifications Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Quick Start Guide Package Content (BiPAC 2073 R2) BiPAC 2073 R2 HomePlug AV 200 Ethernet Adapter Quick Start Guide CD (containing user manual, QSG and utility) Ethernet (CAT-5 LAN) cable Package Content (BiPAC 2074 R2) BiPAC 2074 R2 HomePlug AV 200 Ethernet Bridge with AC Pass-Through Quick Start Guide CD (containing user manual, QSG and utility) Ethernet (CAT-5 LAN) cable z z z Do not use the adapter in high humidity or high temperatures. Do not open or repair the case yourself.
Billion BiPAC 2073 R2/2074 R2 HomePlug AV 200 Ethernet Adapter Series Hardware Overview (BiPAC 2073 R2) The LEDs and Buttons POWER: * Lit when the device is power on. PLC: * Lit when the power line sync is established. * Blinking quickly when data is transmitted or received. ETH: * Lit when connected to an Ethernet device. * Blinking when data is transmitted or received via Ethernet port. SYNC: * Used to establish a LAN network with other PLC adapters.
Quick Start Guide Hardware Overview (BiPAC 2074 R2) The LEDs and Buttons (EU power socket) The Rear Side (EU power plug) POWER: * Lit when the device is power on. PLC: * Lit when the power line sync is established. * Blinking quickly when data is transmitted or received. ETH: * Lit when connected to an Ethernet device. * Blinking when data is transmitted or received via Ethernet port. Power Plug SYNC: * Used to establish a LAN network with other PLC adapters.
Billion BiPAC 2073 R2/2074 R2 HomePlug AV 200 Ethernet Adapter Series Clip Installation (For separated plug clip type only) Installing the clip with BiPAC 2073 R2 Follow the diagrams and direction to install the clip. (This is an example of EU clip. Please check the lock instruction on your clip. If you got the “Triangle Lock”, refer to right diagram.) Follow the diagrams and direction to install the clip. (This is an example of UK clip. Please check the lock instruction on your clip.
Quick Start Guide Hardware Installation 1. Power Connection BiPAC 2073 R2 Plug the Homeplug AV 200 Ethernet Adapter into the wall outlet/socket. BiPAC 2074 R2 Plug the embedded AC power cable to the wall outlet/socket. Please note that the plug type may differ according to different countries. 2. LAN Connection Connect the supplied RJ-45 Ethernet cable to the Ethernet port on HomePlug AV 200 Ethernet bridge/adapter and the other side to the device’s Ethernet interface. 3.
Billion BiPAC 2073 R2/2074 R2 HomePlug AV 200 Ethernet Adapter Series 4.1 Connection of the BiPAC 2073 R2 Connect a network cable to the adapter and then plug the BiPAC 2073 R2 into a power socket. Then connect the BiPAC 2073 R2 to a PC, modem, router or a set-top-box. Create a secure network by simply pushing the SYNC button for 1~3 seconds. 4.2 Connection of the BiPAC 2074 R2 Connect a network cable to the adapter and then plug the BiPAC 2074 R2 into a power socket.
Quick Start Guide Product Application Product Support and Contact Information Most problems can be solved by referring to the Troubleshooting section in the User’s Manual.If you cannot resolve the problem with the Troubleshooting chapter, please contact the dealer where you purchased this product. Contact Billion WORLDWIDE http://www.billion.com Billion Product Registration Billion is committed to before and after sales customer services.
