User manual

Billion BiPAC 2073 R2/2074 R2 HomePlug AV 200 Ethernet Adapter Series
-3-
Hardware Overview (BiPAC 2073 R2)
The LEDs and Buttons
The Rear Side The Ethernet Port
(For separated plug clip type only)
ETH:
* Lit when connected to an Ethernet device.
* Blinking when data is transmitted or received
via Ethernet port.
PLC:
* Lit when the power line sync is established.
* Blinking quickly when data is transmitted or
received.
POWER:
* Lit when the
device is
power on.
SYNC:
* Used to establish a LAN network with
other PLC adapters.
Reset:
* Press this button to for 1~3 second(s)
to reset device to factory default
settings.
Ethernet Port:
Connect the HomePlug AV device with
an Ethernet device (e.g. computer,
router, hub/switch , IP pone, IPTV
set-top-box, gaming consoles…), using
the RJ-45 Ethernet cable included.
Clip Socket:
* Install the
clip into
this
socket.
z Please DO NOT remove or disassemble the socket clip
frequently as this may cause serious damage to your
HomePlug AV device!
Warning