BIPAC-2AB 2.
Declaration of Conformity Konformitätserklärung in accordance with the Radio and Telecommunications Terminal Equipment Act (FTEG) and Directive 1999/5/EC (R&TTE Directive) gemäß dem Gesetz über Funkanlagen und Telekommunikationsendeinrichtungen (FTEG) und der Richtlinie 1999/5/EG (R&TTE) The Manufacturer: Billion Electric Co., Ltd. Hersteller: 8F, No. 192, Sec. 2, Chung Hsing Rd., Hsin Tien City, Taipei Hsien Taiwan, R.O.C. declares that the product: BIPAC-2AB V2.
Table of Contents CHAPTER 1 1 Introduction ................................................................................... 1 An Overview of the BIPAC-2AB 2.0 .......................................... 1 Package Contents ......................................................................... 2 BIPAC-2AB 2.0 Features............................................................. 3 CHAPTER 2 4 Using BIPAC-2AB 2.0 ................................................................... 4 Before Connecting ......
Chapter 1 Introduction An Overview of the BIPAC-2AB 2.0 What is ISDN? ISDN is an abbreviation for Integrated Services Digital Network. ISDN transfers information digitally and integrates all telecommunication services (such as telephone, teletext, videotex, etc.) into a single network. Using ISDN, you can transfer text, voice, data files, images, and even video. Before the use of ISDN, telecommunications operated using analog devices, which limited the quality of telecommunication transfers.
BIPAC-2AB 2.0 User’s Manual The BIPAC-2AB 2.0 ISDN a/b Adaptor The BIPAC-2AB 2.0 ISDN a/b adaptor allows you to make the transition from analog to digital without having to discard all your present analog devices. The BIPAC-2AB 2.0 provides an interface between your ISDN line and present analog devices such as your telephone. With a full array of convenient functions such as call waiting, call holding, call transfer, call forwarding and speed dialing among others, your BIPAC-2AB 2.
Chapter 1 Introduction 2. One RJ-45 cable 3. One AC-to-DC power adaptor 4. This User’s Manual BIPAC-2AB 2.0 Features The BIPAC-2AB 2.
Chapter 2 Using BIPAC-2AB 2.0 Before Connecting Make sure that you have all you need to connect the BIPAC-2AB 2.0 ISDN a/b adaptor. You should have the following: 1. At least one analog telephone (or other analog device) 2. A power outlet that supplies 220 ~ 240 volts AC 3. An ISDN basic rate S0 interface released by PTT (Post, Telephone and Telegraph administration) Connecting the BIPAC-2AB 2.0 Please refer to the following instructions and figures for installation procedures: 1.
Chapter 2 Using BIPAC-2AB 2.0 FIGURE 2: CONNECTING THE BIPAC-2AB 2.0 4. The BIPAC-2AB 2.0 ISDN a/b adaptor will run a Power-On selfdiagnostic test. The LEDs on the front panel will blink on and off one by one and the connected analog telephones will ring. The Front Panel LEDs The following illustration and table describe the front panel LEDs: FIGURE 3: THE FRONT PANEL LEDS LED PWR RUN ISDN B1 B2 Meaning When lit it indicates AC power is connected. Flashes periodically to indicate that the BIPAC-2AB 2.
BIPAC-2AB 2.0 User’s Manual Programming the BIPAC-2AB 2.0 Functions The functions of BIPAC-2AB 2.0 are programmed by the use of the telephone number keys (0 ~ 9), the pound key (#), and the star key (*). You should hear 2 short tones if the programming is successful; otherwise, you will hear more than 6 tones indicating failure of programming.
Chapter 2 Using BIPAC-2AB 2.
BIPAC-2AB 2.0 User’s Manual Ring Pattern (Alert On/Off Length) Setup * 83 * Pass * Func Id * Parameter # Func Id=0, Ring unit parameter=01~99(0.
Chapter 2 Using BIPAC-2AB 2.0 Function Description External Calling To make an external phone call, dial the number as you would with a regular phone system. Inter-call or Internal Calling To make a call to the other analog port of the ISDN a/b adaptor, you can press: # Speed Dialing To dial any of the Speed Dialing numbers that you have programmed in, use the following command: * 5 ID where ID is a number from 1 to 4.
BIPAC-2AB 2.0 User’s Manual Call Waiting If you have an active call and the Call Waiting function is enabled, you will hear two tones when there is another incoming call. You can switch between the two calls by using the Hold/Retrieve function (* # ).
Chapter 2 Using BIPAC-2AB 2.0 Keypad Some telephone companies’ ISDN systems are using “Keypad Protocol” for activating/deactivating some supplementary services, such as external call forwarding. To let the ISDN a/b adaptor enter “Keypad” mode, you can press: *00 Then, all the following keys and numbers will be sent out using “Keypad Protocol”.
Chapter 3 Troubleshooting Troubleshooting Procedures Error Event Possible Cause Remedy The B1 LED is always lit after power up The RAM is defective. Consult your dealer. The B2 LED is always lit after power up The ISDN chip is defective. Consult your dealer. No dial tone from ISDN switch or PABX 1. Can not activate S0 1. Ensure that the ISDN S0 line is securely connected to the RJ-45 jack. 2. No B channel available 2. Ensure no other device is on the same S0 line and occupying the B channel.
Appendix A — Product Support Error Event Can not receive incoming call. Can not have call waiting function. Possible Cause Remedy 1. Incoming call’s phone number does not match any a/b port’s phone number 1. Ensure that the phone number for each a/b port is correctly configured. 2. Do Not Disturb function has been enabled. 2. Disable Do Not Disturb. 3. Call Forwarding function has been enabled. 3. Disable Call Forwarding. 1. Telephone company does not support this function. 1.
