User manual

Repeater Mode

In Repeater Mode, the packets can be forwarded to other AP via WDS connections. Here, AP

functions similarly as that in Lazy Mode, which can establish the connection with other AP(s), and

the wireless client(s) can connect the device too. It needs to input other AP MAC address(es) as

well.

● Step 1: If you want the device to be a repeater, select Repeater Mode from the WDS Mode

drop-down menu.

● Step 2: Fill in the blank with MAC Address of the connected device(s), which display in WDS

Bridge and Repeater Mode. 4 AP MAC Addresses can be lled simultaneously. it is

important that your peer’s AP must include your MAC address and all of the

AP's channel must be the same in WDS to acknowledge and communicate with

each other.

● Step 3: Click "Wireless Security" to set the encryption keys (Please resfer to Wireless Security/

Encryption Settings section after setting up the WDS Mode).

Note: Please be aware that WDS may be incompatible between different products (even

from the same vendor) since it is not certied by the Wi-Fi Alliance.