User manual

Billion BIPAC 6500 Broadband VPN Firewall Router

3.2 Factory Default Settings

Before you configure BIPAC 6500, you need to know the following default settings.

1. Web Configurator

Password : <BLANK>

BLANK means user does not need to input any characters.

2. Device IP Network settings in LAN site

IP Address : 192.168.1.254

Subnet Mask : 255.255.255.0

3. ISP setting in WAN site

Obtain an IP address automatically

4. DHCP server

DHCP server is enabled.

IP address pool from IP Address : 192.168.1.100 to IP Address : 192.168.1.199

3.2.1 Password

The password is left blank as the default setting. When configuring your router with Web

browser, just click “OK”, and then you are logged in for the first time. It is recommended that

you set a password for security and management purpose. BIPAC 6500 maintains the

password only. It means BIPAC 6500 only checks the password even you enter characters in

the User Name field.

If you ever forget the password to log in, you should contact the dealer where you

bought this product.