User manual

Billion BIPAC 6600 Broadband Firewall Router
6
2.4 Cabling
Through Ethernet Port
Please refer to section 1.4 “BIPAC 6600 Application” first; it gives a clear cable
connection diagram.
The most common problem associated with Ethernet is bad cabling. Make sure that all
connected devices are turned on. On the top of the product is a bank of LEDs, as a first
check, verifies that the relevant LAN Link and WAN Link LEDs are lit. If they are not,
verify that you are using the proper cables.
As long as the cables are connected and the LEDs are lit normally, follow section “3.2
Configuring the Network Properties” below to modify the network settings.
Since the product cannot auto-detect whether your cable is correct or not, please make
sure you are using the right cable to a PC or a Hub.