BiPAC 7401VP/VGP VoIP/(802.
Billion VoIP/(802.11g) ADSL2+ Router For more detailed instructions on configuring and using the Billion VoIP/(802.11g) ADSL2+ Router, please refer to the online manual. Package Contents VoIP/(802.11g) ADSL2+ Router CD-ROM containing the user manual RJ-11 ADSL/telephone Cable Ethernet (CAT-5 LAN) Cable Console tool A detachable Antenna (Wireless router only) AC-DC power adapter (12VDC, 1A) This Quick Start Guide Do not use this router in high humidity or high temperatures.
Quick Start Guide The Front LEDs LED 1 PWR Lit when power is ON. 2 SYS Lit when the system is ready. 3–6 LAN Port 1X — (RJ-45 connector) 8 9 2 Meaning WLAN (Wireless router only) Phone (RJ-11 connector) Lit when connected to an Ethernet device. 4X Green for 100Mbps; Orange for 10Mbps. Blinking when data is Transmitted / Received. Lit green when the wireless connection is established. Flashes when sending/receiving data. Lit green when the phone is off-hook.
Billion VoIP/(802.11g) ADSL2+ Router The Rear Ports 6 8 5 7 3 1 2 4 The Ethernet Port # 4 can be connected to the computer and console. You need a special console tool which is included in this package to connect the LAN cable of Port 4 when connecting to a PC’s RS-232 port (9-pin serial port). Port Meaning 1 Power Switch Power ON/OFF switch 2 Power Connect the supplied power adapter to this jack.
Quick Start Guide Connecting Your ADSL Router 1. Connect this router to a LAN (Local Area Network) and the ADSL/telephone (ADSL) network. 2. Power on the device. 3. Make sure the PWR and SYS LEDs are lit steadily and that the LAN LED is lit. 4. Connect an RJ11 cable to VoIP port when connecting to an analog phone set. 5. Connect RJ-11 cable to LINE Port when connecting to the telephone wall jack. (802.
Billion VoIP/(802.11g) ADSL2+ Router Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration.
Quick Start Guide Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration.
Billion VoIP/(802.11g) ADSL2+ Router Configuring PC in Windows 98/Me 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP -> NE2000 Compatible, or the name of your Network Interface Card (NIC) in your PC. 3. Select the Obtain an IP address automatically radio button. 4. Then select the DNS Configuration tab. 5. Select the Disable DNS radio button and click OK to finish the configuration.
Quick Start Guide Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 3. Select the Obtain an IP address from a DHCP server radio button and click OK.
Billion VoIP/(802.11g) ADSL2+ Router Configuring Your ADSL Router To configure this device, you must have IE 5.0 / Netscape 4.5 or above installed Verifying Your Local Network Connection with the Device To see if this ADSL Router is visible on the local network, go to Start / Run. In the Run dialog box, type “ping 192.168.1.254” then press OK. A command prompt window will pop out.
Quick Start Guide Connecting to the Router 1. Open the web browser and type http://192.168.1.254 in the browser’s address box. This number is the default IP address for this router. Press Enter. 2. A username and password window will appear. The default username and password are admin and admin. Press OK to proceed. 3. You will get a status report web page and main menu screen.
Billion VoIP/(802.
