BIPAC- 8500 / 8520 SHDSL VPN Firewall Bridge / Router Quick Start Guide
Billion BIPAC-8500 / 8520 - SHDSL VPN Firewall Bridge / Router For more detailed instructions on configuring and using the SHDSL Firewall Bridge / Router, please refer to the on-line manual. Package Contents BIPAC-8500 / 8520 SHDSL Bridge / Router CD-ROM containing the online manual RJ-11 SHDSL / telephone Cable Ethernet (CAT-5 LAN) Cable Console (PS2-RS232) Cable AC-DC power adapter (12VDC, 1A) This Quick Start Guide Do not use the BIPAC-8500 / 8520 in high humidity or high temperatures.
Quick Start Guide The Front LEDs 1 2 5 3 LED 1 LINE 1 & 2 2 2 4 Meaning Lit when successfully connected to SHDSL line and it is synchronized. 3 Lit when connected to an Ethernet device. 4X Green for 100Mbps; Orange for 10Mbps. (RJ-45 connector) Blinking when data is Transmitted / Received. 4 SYS Lit when the system is ready. 5 PWR Lit when power is ON.
Billion BIPAC-8500 / 8520 - SHDSL VPN Firewall Bridge / Router The Rear Ports 4 *6 1 3 5 2 ＊Only the BIPAC-8520 has two Line jack ports. BIPAC-8500 has one. Port Meaning 1 Power Switch Power ON/OFF switch 2 PWR Connect the supplied power adapter to this jack. 3 RESET After the device is powered on, press it to reset the device or restore to factory default settings.
Quick Start Guide Connecting Your SHDSL Bridge / Router 1. Connect the Router to a LAN (Local Area Network) and the SHDSL LINE. 2. Power on the device. 3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN and LINE LED are lit.
Billion BIPAC-8500 / 8520 - SHDSL VPN Firewall Bridge / Router Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6.
Quick Start Guide Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration.
Billion BIPAC-8500 / 8520 - SHDSL VPN Firewall Bridge / Router Configuring PC in Windows 98/Me 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP -> NE2000 Compatible, or the name of your Network Interface Card (NIC) in your PC. 3. Select the Obtain an IP address automatically radio button. 4. Then select the DNS Configuration tab. 5. Select the Disable DNS radio button and click OK to finish the configuration.
Quick Start Guide Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 3. Select the Obtain an IP address from a DHCP server radio button and click OK.
Billion BIPAC-8500 / 8520 - SHDSL VPN Firewall Bridge / Router Configuring Your SHDSL VPN Firewall Bridge / Router To configure this device, you must have IE 5.0 / Netscape 4.5 or above installed Verifying Your Local Network Connection with the Device To see if this SHDSL Router is visible on the local network, go to Start / Run. In the Run dialog box, type “ping 192.168.1.254” then press OK. A command prompt window will pop out.
Quick Start Guide Connecting to the Bridge / Router Open the web browser and type http://192.168.1.254 in the browser’s address box. This number is the default IP address for this router. Press Enter. A user name and password window will appear. The default User Name and Password are “admin” and” admin”. Press OK to logon to the router Product Support and Contact Information Most problems can be solved by referring to the Troubleshooting section in the User’s Manual.
