BiPAC 8500/8520 SHDSL VPN Firewall Bridge / Router Quick Start Guide
Billion BiPAC 8500/8520 SHDSL VPN Firewall Bridge/ Router For more detailed instructions on configuring and using the SHDSL Firewall Bridge / Router, please refer to the on-line manual.
Quick Start Guide The Front LEDs of BiPAC 8500 1 4 2 LED 2 1 LINE 2 LAN Port 1X — 4X 3 Meaning Lit when successfully connected to SHDSL line and it is synchronized. (RJ-45 connector) Lit when connected to an Ethernet device. Green for 100Mbps; Orange for 10Mbps. Blinking when data is Transmitted / Received. 3 SYS Lit when the system is ready. 4 PWR Lit when power is ON.
Billion BiPAC 8500/8520 SHDSL VPN Firewall Bridge/ Router The Front LEDs of BiPAC 8520 1 2 5 3 4 LED 1 LINE 1 & 2 2 Meaning Lit when successfully connected to SHDSL line and it is synchronized. (RJ-45 connector) Lit when connected to an Ethernet device. Green for 100Mbps; Orange for 10Mbps. Blinking when data is Transmitted / Received. 4 SYS Lit when the system is ready. 5 PWR Lit when power is ON.
Quick Start Guide The Rear Ports 4 *6 1 3 5 2 ＊Only the BiPAC 8520 has two Line jack ports. BiPAC 8500 has one. Port 1 Power Switch Power ON/OFF switch 2 PWR Connect the supplied power adapter to this jack. 3 RESET To be sure the device is being turned on->press RESET button for: 1-3 seconds: quick reset the device. 6 seconds above, and power off, power on the device: restore to factory default settings. (Cannot login to the router or forgot your Username/Password.
Billion BiPAC 8500/8520 SHDSL VPN Firewall Bridge/ Router Connecting Your SHDSL Bridge / Router 1. Connect the Router to a LAN (Local Area Network) and the SHDSL LINE. 2. Power on the device. 3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN and LINE LED are lit.
Quick Start Guide Configuring PC in Windows Vista 6 1. Go to Start. Click on Network. 2. Then click on Network and Sharing Center at the top bar. 3. When the Network and Sharing Center window pops up, select and click on Manage network connections on the left window pane. 4. Select the Local Area Connection, and right click the icon to select Properties.
Billion BiPAC 8500/8520 SHDSL VPN Firewall Bridge/ Router 5. Select Internet Protocol Version 4 (TCP/IPv4) then click Properties. 6. In the TCP/IPv4 properties window, select the Obtain an IP address automatically and Obtain DNS Server address automatically radio buttons. Then click OK to exit the setting. 7. Click OK again in the Local Area Connection Properties window to apply the new configuration.
Quick Start Guide Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window, click Properties.
Billion BiPAC 8500/8520 SHDSL VPN Firewall Bridge/ Router 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration.
Quick Start Guide Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window click Properties.
Billion BiPAC 8500/8520 SHDSL VPN Firewall Bridge/ Router 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration.
Quick Start Guide Configuring PC in Windows 98/Me 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP ->NE2000 Compatible, or the name of your Network Interface Card (NIC) in your PC. Then click Properties. 3. Select the Obtain an IP address automatically radio button.
Billion BiPAC 8500/8520 SHDSL VPN Firewall Bridge/ Router 4. Then select the DNS Configuration tab. 5. Select the Disable DNS radio button and click OK to finish the configuration.
Quick Start Guide Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 3. Select the Obtain an IP address from a DHCP server radio button and click OK.
Billion BiPAC 8500/8520 SHDSL VPN Firewall Bridge / Router Configuring Your SHDSL VPN Firewall Bridge / Router To configure this device, you must have IE 5.0 / Netscape 4.5 or above installed Verifying Your Local Network Connection with the Device To see if this SHDSL Router is visible on the local network, go to Start / Run. In the Run dialog box, type “ping 192.168.1.254” then press OK. A command prompt window will pop out.
Quick Start Guide Connecting to the Bridge / Router Open the web browser and type http://192.168.1.254 in the browser’s address box. This number is the default IP address for this router. Press Enter. A user name and password window will appear. The default User Name and Password are “admin” and” admin”. Press OK to proceed. Please see the relevant sections of on-line manual for detailed instructions on how to configure your router.
