User's Manual

UM600410 Rev C page 10 of 81
User Manual –I-Series 4.0
Unpacking
Verify that the box contains:
• Elo I-Series 4.0
• Power Brick
• Region Specific power cable
• Quick Install Guide
Remove all protective materials from the device.
Inspect the device for damage.
Report immediately if system has damage and/or missing items as listed above.
How to Install Power over Ethernet (Elo Part Number E413396)
• Unscrew the PoE cover from the back of the device.
o See full details in the Power over Ethernet kit Quick Install Guide
• Mount the PoE module so that the pins line up with the mating receptacle.
Power Button
Note: As soon as power is applied to the system, the device will boot up.
Do not touch the screen during system boot up.
• To turn ON the system, press power button for 500 milliseconds.
• To Shut down or Restart, press and hold the power button for more than 2 seconds and follow the on-screen display menu.
• To force the system to Shutdown, press and hold the power button for 12 seconds.
• To bring the system out of sleep/standby mode, either press the power button once or touch the screen.
Power LED Status
POWER LED STATUS
DESCRIPTION
OFF
OFF
Solid White
Power ON
Solid Orange
Power OFF
Blinking White
Idle Mode