User's Manual

UM600410 Rev C page 22 of 81
User Manual –I-Series 4.0
Enabling Dynamic Frequency Selection (DFS) channels
• From the Wi-fi settings page, select Wi-FI preferences
• Select Advanced
• Enable or Disable the DFS selection option
• The following channels are supported:
Channel 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144
Disconnecting a connected Wireless Network
• Tap setting of the connected device.
• Tap (FORGET) icon to disconnect.
Ethernet LAN (Gigabit)
Note: To connect the I-Series 4.0 to Ethernet, it will need an Elo I/O hub (E863687). When available, the I-Series 4.0 will automatically prioritize
the ethernet connection. If the I-Series 4.0 does not, please follow the steps below.
• Place the I-Series 4.0 into the Elo Home APK.
• Set Wi-Fi to disable.
• Go to Wi-Fi settings, tap Use Wi-Fi to disable .
• Tap Ethernet.
• Tap toggle switch to enable .
Airplane mode
This will disable all of the wireless transmission functions. Including cellular, Wi-Fi, and Bluetooth.
• To enable , tap Airplane mode.
Hotspot & tethering
Wi-Fi hotspot
This feature is for sharing Internet network connection with another device using Wi-Fi.
Note: The I-Series 4.0 must be connected to Wi-Fi. See Network & Internet connection on this user manual.
• Tap Hotspot and tethering.
• Tap Wi-Fi hotspot.
• Tap toggle switch to ON .
• Tap QR code.