User's Manual

3.1.1. Bridge Mode

If you are connecting to a local network and the device performs simply a wireless AP

(Access Point), you can select the Bridge Mode as shown in figure as blow, At this

moment, the device becomes one of other existing LAN devices. All routing functions are

disabled except the Enable DHCP Client option.

Be sure to enable DHCP client, or the system can NOT work as you did not properly set the

LAN IP for the Bluetooth PAN Router in Bridging Mode

3.1.2. Router Mode

By default, the Bluetooth access point wtih broadband router is set to the Routing mode

(PPPoE) that enables NAT (Net Address Translation Protocol) function and performs a

wireless portal for a secure sub-network.