User's Manual

30
3.1.2.2. Manual:
You can determine the IP address assigned to the Access Point.
3.1.2.3. PPPoE
1. When connecting through a PPPoE connection, be sure to have Your PPPoE User
Name, and Your PPPoE Password.
(1) PPPoE Account and Password: the account and password your ISP assigned
to you. If you don't want to change the password, keep it empty.
(2) PPPoE Service Name: optional. Input the service name if your ISP requires it.
(3) Maximum Idle Time: the time of no activity to disconnect your PPPoE session.
Set it to 0 will disable this feature.
2. On the fourth block, enter the Local IP and Subnet Mask. This is the Router’s IP
Address and Subnet Mask as seen on the internal LAN. The default value is
192.168.18.1 for IP Address and 255.255.255.0 for Subnet Mask.
3. Enter the Default Gateway which is the same as Local IP in this device.
4. Click the Apply button to save the settings if you wish to configure other settings before
restarting the system. The system will store all parameters and show the proper